Multifunctional Deep-Blue Thermally Activated Delayed Fluorescence Based on an Oxygen-Bridged Boron Acceptor for Highly Efficient Organic Light-Emitting Diodes.

Until now, thermally activated delayed fluorescence (TADF) materials based on bridged boron-based acceptors have been primarily developed as dopants. However, in this study, we synthesized and characterized multifunctional deep-blue TADF materials─t-OBO-DMAC and t-OBO-DPAC─using bridged boron-based acceptors in combination with dimethylacridine or diphenylacridine as donors. These materials serve as both dopants and hosts. Theoretical calculations and experimentally measured photophysical properties of t-OBO-DMAC reveal a smaller singlet-triplet energy difference, higher photoluminescence quantum yield, and more efficient reverse intersystem crossing compared to t-OBO-DPAC. When evaluated as TADF emitters, t-OBO-DMAC and t-OBO-DPAC exhibited maximum external quantum efficiency (EQE) of 14.4 and 7.3% with deep-blue color coordinates of (0.14, 0.11) and (0.15, 0.07), respectively. Both materials were further assessed as hosts in various configurations, including host-only, TADF, phosphorescent, and phosphor-sensitized fluorescence (PSF)-emitting systems. Notably, t-OBO-DMAC demonstrated a high maximum EQE of 13.9% with deep-blue color coordinates of (0.15, 0.07) in a nondoped host-only device. Remarkably, both materials achieved EQEs exceeding 20% in the PSF devices. Our study marks a critical advancement in the field that breaks the conventional boundaries of the dopant and host and demonstrates unprecedented multifunctionalities for advanced organic light-emitting diodes.

Macrophages as carriers of boron carbide nanoparticles dedicated to boron neutron capture therapy.

BACKGROUND: The use of cells as carriers for the delivery of nanoparticles is a promising approach in anticancer therapy, mainly due to their natural properties, such as biocompatibility and non-immunogenicity. Cellular carriers prevent the rapid degradation of nanoparticles, improve their distribution, reduce cytotoxicity and ensure selective delivery to the tumor microenvironment. Therefore, we propose the use of phagocytic cells as boron carbide nanoparticle carriers for boron delivery to the tumor microenvironment in boron neutron capture therapy. RESULTS: Macrophages originating from cell lines and bone marrow showed a greater ability to interact with boron carbide (B4C) than dendritic cells, especially the preparation containing larger nanoparticles (B4C 2). Consequently, B4C 2 caused greater toxicity and induced the secretion of pro-inflammatory cytokines by these cells. However, migration assays demonstrated that macrophages loaded with B4C 1 migrated more efficiently than with B4C 2. Therefore, smaller nanoparticles (B4C 1) with lower toxicity but similar ability to activate macrophages proved to be more attractive. CONCLUSIONS: Macrophages could be promising cellular carriers for boron carbide nanoparticle delivery, especially B4C 1 to the tumor microenvironment and thus prospective use in boron neutron capture therapy.

Supplemental Silicon and Boron Alleviates Aluminum-Induced Oxidative Damage in Soybean Roots.

Aluminum (Al) toxicity in acidic soils is a major abiotic stress that negatively impacts plant growth and development. The toxic effects of Al manifest primarily in the root system, leading to inhibited root elongation and functionality, which impairs the above-ground organs of the plant. Recent research has greatly improved our understanding of the applications of small molecule compounds in alleviating Al toxicity. This study aimed to investigate the role of boron (B), silicon (Si), and their combination in alleviating Al toxicity in soybeans. The results revealed that the combined application significantly improved the biomass and length of soybean roots exposed to Al toxicity compared to B and Si treatments alone. Our results also indicated that Al toxicity causes programmed cell death (PCD) in soybean roots, while B, Si, and their combination all alleviated the PCD induced by Al toxicity. The oxidative damage induced by Al toxicity was noticeably alleviated, as evidenced by lower MAD and H2O2 accumulation in the soybean roots treated with the B and Si combination. Moreover, B, Si, and combined B and Si significantly enhanced plant antioxidant systems by up-regulating antioxidant enzymes including CAT, POD, APX, and SOD. Overall, supplementation with B, Si, and their combination was found to alleviate oxidative damage and reduce PCD caused by Al toxicity, which may be one of the mechanisms by which they alleviate root growth inhibition due to Al toxicity. Our results suggest that supplementation with B, Si, and their combination may be an effective strategy to improve soybean growth and productivity against Al toxicity.

Confirmation of the stereochemistry of spiroviolene.

We confirm the previously revised stereochemistry of spiroviolene by X-ray crystallographically characterizing a hydrazone derivative of 9-oxospiroviolane, which is synthesized by hydroboration/oxidation of spiroviolene followed by oxidation of the resultant hydroxy group. An unexpected thermal boron migration occurred during the hydroboration process of spiroviolene that resulted in the production of a mixture of 1α-hydroxyspiroviolane, 9α- and 9ß-hydroxyspiroviolane after oxidation. The assertion of the cis-orientation of the 19- and 20-methyl groups provided further support for the revised cyclization mechanism of spiroviolene.

A Naphthalenetetracarboxdiimide-Containing Covalent Organic Polymer: Preparation, Single Crystal Structure and Battery Application.

Inspired by dative boron-nitrogen (B←N) bonds proven to be the promising dynamic linkage for the construction of crystalline covalent organic polymers/frameworks (COPs/COFs), we employed 1,4-bis(benzodioxaborole) benzene (BACT) and N,N'-Di(4-pyridyl)-1,4,5,8-naphthalenetetracarboxdiimide (DPNTCDI) as the corresponding building blocks to construct a functional COP (named as CityU-25), which had been employed as an anode in rechargeable lithium ion batteries. CityU-25 displayed an excellent reversible lithium storage capability of 455 mAh/g after 170 cycles at 0.1 A/g, and an impressive one of 673 mAh/g after 720 cycles at 0.5 A/g. These findings suggest that CityU-25 is a standout candidate for advanced battery technologies, highlighting the potential application of this type of materials.

Cellulose supported TiO2/Cu2O for highly asymmetric conjugate addition of α,ß-unsaturated compounds in aqueous phase.

A series of new kind green cellulose-supported bimetallic TiO2/Cu2O (Cell@TiO2/Cu2O) catalytic materials were obtained by in-situ reduction method employing cellulose as the carrier. The effects of metal percentage composition on the morphology and construction of the catalytic materials were systematically investigated. The Cell@TiO2/Cu2O were characterized by FT-IR, TG, XPS, SEM, TEM, EDS, and the element content was obtained by elemental analysis. Then, the achieved catalytic materials were applied to the chiral borylation reaction of α,ß-unsaturated compounds, including nitrile compounds, esters, and α,ß-unsaturated ketones. Remarkably, this approach provides an efficient strategy to gain an important class of chiral organic boron compounds with target chiral products in high yields as well as enantioselectivities. Besides, the Cell@TiO2/Cu2O could be easily recycled and effectively reused. This work constructed bimetallic TiO2/Cu2O on cellulose as a newly catalyst to obtain chiral boron compounds in aqueous phase.

Cryogenic Thermal Shock Effects on Optical Properties of Quantum Emitters in Hexagonal Boron Nitride.

Solid-state quantum emitters are vital building blocks for quantum information science and quantum technology. Among various types of solid-state emitters discovered to date, color centers in hexagonal boron nitride have garnered tremendous traction in recent years, thanks to their environmental robustness, high brightness, and room-temperature operation. Most recently, these quantum emitters have been employed for satellite-based quantum key distribution. One of the most important requirements to qualify these emitters for space-based applications is their optical stability against cryogenic thermal shock. Such an understanding has, however, remained elusive to date. Here, we report on the effects caused by such thermal shock that induces random, irreversible changes in the spectral characteristics of the quantum emitters. By employing a combination of structural characterizations and density functional calculations, we attribute the observed changes to lattice strain caused by cryogenic temperature shock. Our study sheds light on the stability of the quantum emitters under extreme conditions─similar to those countered in outer space.

Size effects and electronic properties of zinc-doped boron clusters Zn B n (n = 1-15).

CONTEXT: To gain a deeper understanding of zinc-doped boron clusters, theoretical calculations were performed to investigate the size effects and electronic properties of zinc-doped boron clusters. The study of the electronic properties, spectral characteristics, and geometric structures of Zn B n (n = 1-15) is of great significance in the fields of semiconductor materials science, material detection, and improving catalytic efficiency. The results indicate that Zn B n (n = 1-15) clusters predominantly exhibit planar or quasi-planar structures, with the Zn atom positioned in the outer regions of the B n framework. The second stable structure of Zn B 3 is a three-dimensional configuration, indicating that the structures of zinc-doped boron clusters begin to convert from the planar or quasi-planar structures to the 3D configurations. The second low-energy structure of Zn B 15 is a novel configuration. Relative stability analyses show that the Zn B 12 has better chemical stability than other clusters with a HOMO-LUMO gap of 2.79 eV. Electric charge analysis shows that part electrons on zinc atoms are transferred to boron atoms, and electrons prefer to cluster near the B n framework. According to the electron localization function, it gets harder to localize electrons as the equivalent face value drops, and it's challenging to see covalent bond formation between zinc and boron atoms. The spectrograms of Zn B n (n = 1-15) exhibit distinct properties and notable spectral features, which can be used as a theoretical basis for the identification and confirmation of boron clusters doped with single-atom transition metals. METHODS: The calculations were performed using the ABCluster global search technique combined with density functional theory (DFT) methods. The selected low-energy structures were subjected to geometric optimization and frequency calculations at the PBE0/6-311 + G(d) level to ensure structural stability and eliminate any imaginary frequencies. To acquire more precise relative energies, we performed single-point energies calculations for the low-lying isomers of Zn B n (n = 1-15) at the CCSD(T)/6-311 + G(d)//PBE0/6-311 + G(d) level of theory. All calculations were performed using Gaussian 09 software. To facilitate analysis, we utilized software tools such as Multiwfn, and VMD.

Unlocking the potential: phenylboronic acid as a nuclear-targeting boron agent for neutron capture therapy.

It has been proposed that boron neutron capture therapy (BNCT) holds promise as a treatment modality for melanoma. However, the effectiveness of boron agents in delivery remains a critical issue to be addressed for BNCT. To this end, phenylboronic acid, which exhibits good water solubility and low cytotoxicity similar to BPA, has been investigated as a potential nuclear-targeting boron agent. The boron concentration of phenylboronic acid was found to be 74.47 ± 12.17 ng/106 B16F10 cells and 45.77 ± 5.64 ng/106 cells in the nuclei. Molecular docking experiments were conducted to investigate the binding of phenylboronic acid to importin proteins involved in nuclear transport. The potential of phenylboronic acid to serve as a desirable nucleus-delivery boron agent for neutron capture therapy in melanoma warrants further exploration.

Catalytic Access to Diastereometrically Pure Four- and Five-Membered Silyl-Heterocycles Using Transborylation.

Silyl-heterocycles offer a unique handle to expand and explore chemical space, reactivity, and functionality. The shortage of catalytic methods for the preparation of diverse and functionalized silyl-heterocycles however limits widespread exploration and exploitation. Herein the borane-catalyzed intramolecular 1,1-carboboration of silyl-alkynes has been developed for the synthesis of 2,3-dihydrosilolyl and silylcyclobut-2-enyl boronic esters. Successful, catalytic carboboration has been achieved on a variety of functionally diverse silyl-alkynes, using a borane catalyst and transborylation enabled turnover. Mechanistic studies, including 13C-labelling, computational studies, and single-turnover experiments, suggest a reaction pathway proceeding by 1,2-hydroboration, 1,1-carboboration, and transborylation to release the alkenyl boronic ester product and regenerate the borane catalyst.

Clinical Results and Prognostic Factors in BNCT for Recurrent Squamous Cell Carcinoma of the Head and Neck under the Japan National Health Insurance System: A Retrospective Study of the Initial 47 Patients.

PURPOSE: Recurrent head and neck cancer presents a therapeutic challenge due to cumulative toxicity from initial radiation therapy, limiting re-irradiation options. Boron neutron capture therapy (BNCT) offers a promising alternative, selectively delivering a radical dose to tumors while sparing adjacent normal tissue. This study investigates the initial clinical outcomes and prognostic factors associated with BNCT for recurrent squamous cell carcinoma of the head and neck. MATERIALS AND METHODS: This retrospective analysis investigated the initial 47 patients treated with BNCT between May 2020 and February 2021 in Japan. All patients had received radiotherapy with a median dose of 70 Gy (range, 44-176) prior to BNCT. Median tumor size was 11 cm3 (range, 1-117 cm3), with 23% of tumors larger than 30 cm3, and 87% of patients had prior systemic therapy. The most common prescribed dose to the pharyngeal mucosa was 15 Gy-Eq (36%), followed by 18 Gy-Eq (34%). The minimum dose given to tumor was 27.4 Gy-Eq (range, 13.3-45.2). In 23 patients, 18F-FBPA-PET was performed within 1 week before BNCT, tumor to blood 10B ratio was 3.5 (range, 2.0-8.7). RESULTS: Efficacy analysis revealed a 51% complete response rate and a 74% overall response rate. Disease-free survival rates at 1 and 2 years were 34.6% and 26.6%, respectively. Overall survival rates at 1 and 2 years were 86.1% and 66.5%, respectively. Multivariate analysis revealed that, among the patient characteristics, whether the lesion was mucosal had a significant impact on achieving complete response. CONCLUSIONS: This study provided valuable insights into the early integration of BNCT into routine clinical practice, highlighting its efficacy and safety. Technical improvements are needed to ensure precise dose administration. Ongoing prospective studies, such as the phase II REBIVAL study, will further elucidate the role of BNCT in recurrent head and neck cancer.

MB16 - (M = Sc, Y, La): Perfect Bowl-like Boron Clusters.

The introduction of transition-metal doping has engendered a remarkable array of unprecedented boron motifs characterized by distinctive geometries and bonding, particularly those heretofore unobserved in pure boron clusters. In this study, we present a perfect (no defects) boron framework manifesting an inherently high-symmetry, bowl-like architecture, denoted as MB16- (M = Sc, Y, La). In MB16-, the B16 is coordinated to M atoms along the C5v-symmetry axis. The bowl-shaped MB16- structure is predicted to be the lowest-energy structure with superior stability, owing to its concentric (2π+10π) dual π aromaticity. Notably, the C5v-symmetry bowl-like B16- is profoundly stabilized through the doping of an M atom, facilitated by strong d-pπ interactions between M and boron motifs, in conjunction with additional electrostatic stabilization by an electron transfer from M to the boron motifs. This concerted interplay of covalent and electrostatic interactions between M and bowl-like B16 renders MB16- a species of exceptional thermodynamic stability, thus making it a viable candidate for gas-phase experimental detection.

Carborane-FAPI conjugate: A potential FAP-targeted boron agent with improved boron content.

Boron neutron capture therapy (BNCT) has received extensive attention as an advanced binary radiotherapy method. However, BNCT still faces poor selectivity of boron agent and is insufficient boron content in tumor tissues. To improve the tumor-targeted ability and boron content, this research aims to design, synthesize and preliminary evaluate a new borane agent Carborane-FAPI, which coupling the o-carborane to the compound skeleton of a mature fibroblast activating protein (FAP) inhibitor (FAPI). FAP is a tumor-associated antigen. FAP expressed lowly in normal organs and highly expressed in tumors, so it is a potential target for diagnosis and treatment. Boronophenylalanine (BPA) is the most widely investigated BNCT drug in present. Compared with BPA, the boron content of a single molecule is increased and drug targeting is enhanced. The results show that Carboaren-FAPI has low toxicity to normal cells, and selective enrichment in tumor tissues. It is a promising boron drug that has the potential to be used in BNCT.

Chiral Induction in 2D Borophene Nanoplatelets through Stereoselective Boron-Sulfur Conjugation.

Chirality is a structural metric that connects biological and abiological forms of matter. Although much progress has been made in understanding the chemistry and physics of chiral inorganic nanoparticles over the past decade, almost nothing is known about chiral two-dimensional (2D) borophene nanoplatelets and their influence on complex biological networks. Borophene's polymorphic nature, derived from the bonding configurations among boron atoms, distinguishes it from other 2D materials and allows for further customization of its material properties. In this study, we describe a synthetic methodology for producing chiral 2D borophene nanoplatelets applicable to a variety of structural polymorphs. Using this methodology, we demonstrate feasibility of top-down synthesis of chiral χ3 and ß12 phases of borophene nanoplatelets via interaction with chiral amino acids. The chiral nanoplatelets were physicochemically characterized extensively by various techniques. Results indicated that the thiol presenting amino acids, i.e., cysteine, coordinates with borophene in a site-selective manner, depending on its handedness through boron-sulfur conjugation. The observation has been validated by circular dichroism, X-ray photoelectron spectroscopy, and 11B NMR studies. To understand how chiral nanoplatelets interact with biological systems, mammalian cell lines were exposed to them. Results showed that the achiral as well as the left- and right-handed biomimetic χ3 and ß12 borophene nanoplatelets have distinct interaction with the cellular membrane, and their internalization pathway differs with their chirality. By engineering optical, physical, and chemical properties, these chiral 2D nanomaterials could be applied successfully to tuning complex biological events and find applications in photonics, sensing, catalysis, and biomedicine.

The Roles of Impurities and Surface Area on Thermal Stability and Oxidation Resistance of BN Nanoplatelets.

This study considers the influence of purity and surface area on the thermal and oxidation properties of hexagonal boron nitride (h-BN) nanoplatelets, which represent crucial factors in high-temperature oxidizing environments. Three h-BN nanoplatelet-based materials, synthesized with different purity levels and surface areas (~3, ~56, and ~140 m2/g), were compared, including a commercial BN reference. All materials were systematically analyzed by various characterization techniques, including gas pycnometry, scanning electron microscopy, X-ray diffraction, Fourier-transform infrared radiation, X-ray photoelectron spectroscopy, gas sorption analysis, and thermal gravimetric analysis coupled with differential scanning calorimetry. Results indicated that the thermal stability and oxidation resistance of the synthesized materials were improved by up to ~13.5% (or by 120 °C) with an increase in purity. Furthermore, the reference material with its high purity and low surface area (~4 m2/g) showed superior performance, which was attributed to the minimized reactive sites for oxygen diffusion due to lower surface area availability and fewer possible defects, highlighting the critical roles of both sample purity and accessible surface area in h-BN thermo-oxidative stability. These findings highlight the importance of focusing on purity and surface area control in developing BN-based nanomaterials, offering a path to enhance their performance in extreme thermal and oxidative conditions.

Accurate gamma-ray dose measurement up to 10 MeV by glass dosimeter with a sensitivity control filter for BNCT.

Glass dosimeters are very useful and convenient detection elements in radiation dosimetry. In this study, this glass dosimeter was applied to a BNCT treatment field. Boron Neutron Capture Therapy (BNCT) is a next-generation radiation therapy that can selectively kill only cancer cells. In the BNCT treatment field, both neutrons and secondary gamma-rays are generated. In other words, it is a mixed radiation field of neutrons and gamma-rays. We thus proposed a novel method to measure only gamma-ray dose in the mixed field using two RPLGD (Radiophoto-luminescence Glass Dosimeter) and two sensitivity control filters in order to control the dose response of the filtered RPLGD to be proportional to the air kerma coefficients, even if the gamma-ray energy spectrum is unknown. As the filter material iron was selected, and it was finally confirmed that reproduction of the air kerma coefficients was excellent within an error of 5.3% in the entire energy range up to 10 MeV. In order to validate this method, irradiation experiments were carried out using standard gamma-ray sources. As the result, the measured doses were in acceptably good agreement with the theoretical calculation results by PHITS. In the irradiation experiment with a volume source in a nuclear fuel storage room, the measured dose rates showed larger compared with survey meter values. In conclusion, the results of the standard sources showed the feasibility of this method, however for the volume source the dependence of the gamma-ray incident angle on the dosimeter was found to be not neglected. In the next step, it will be necessary to design a thinner filter in order to suppress the effect of the incident angle.

Boron dopant- and nitrogen defect-decorated C3N5 porous nanostructure as an efficient sulfur host for lithium-sulfur batteries.

Active site implantation and morphology manipulation are efficient protocols for boosting the electrochemical performance of carbon nitrides. As a promising sulfur host for lithium-sulfur batteries (LSBs), in this study, C3N5 porous nanostructure incorporated with both boron (B) atoms and nitrogen (N) defects was constructed (denoted as ND-B-C3N5) using a two-step strategy, i.e., pyrolysis of the mixture of 3-amino-1,2, 4-triazole and boric acid to obtain B-doped C3N5 porous nanostructure and then KOH etching under hydrothermal condition to generate N defects. The doped B atoms in the C3N5 porous nanostructure are in the form of B-N bonds and grafted B-O bonds. N defects are primarily created at the CN-C positions of the triazine unit, leaving behind some N vacancies and cyano groups. Benefiting from the involvement of B dopants and N defects, the optimized ND-B-C3N5-12 sample exhibits ameliorative conductivity, mass transport, lithium polysulfides (LiPSs) adsorption ability, diffusion of Li+ ions, Li2S deposition capacity, sulfur redox polarization, and a reversible solid-solid sulfur redox process. Consequently, the ND-B-C3N5-12/S cathode delivers accelerated redox performance of polysulfides for LSBs, revealing capacities of 1091 ± 44 and 753 ± 20 mAh/g at 0.2C for the initial and 300th cycles, respectively. The ND-B-C3N5-12/S cathode is also endowed with desired sulfur redox activity and stability at 2C for 1000 cycles, holding an initial discharging capacity of 788 ± 24 mAh/g and a low decay rate of 0.05 % per cycle.

Translational research of boron neutron capture therapy for spinal cord gliomas using rat model.

Boron neutron capture therapy (BNCT) is a type of targeted particle radiation therapy with potential applications at the cellular level. Spinal cord gliomas (SCGs) present a substantial challenge owing to their poor prognosis and the lack of effective postoperative treatments. This study evaluated the efficacy of BNCT in a rat SCGs model employing the Basso, Beattie, and Bresnahan (BBB) scale to assess postoperative locomotor activity. We confirmed the presence of adequate in vitro boron concentrations in F98 rat glioma and 9L rat gliosarcoma cells exposed to boronophenylalanine (BPA) and in vivo tumor boron concentration 2.5 h after intravenous BPA administration. In vivo neutron irradiation significantly enhanced survival in the BNCT group when compared with that in the untreated group, with a minimal BBB scale reduction in all sham-operated groups. These findings highlight the potential of BNCT as a promising treatment option for SCGs.

Adaptive and Robust Vitrimers Fabricated by Synergy of Traditional and Supramolecular Polymers.

Vitrimers offer a unique combination of mechanical performance, reprocessability, and recyclability that makes them highly promising for a wide range of applications. However, achieving dynamic behavior in vitrimeric materials at their intended usage temperatures, thus combining reprocessability with adaptivity through associative dynamic covalent bonds, represents an attractive but formidable objective. Herein, we couple boron-nitrogen (B-N) dative bonds and B-O covalent bonds to generate a new class of vitrimers, boron-nitrogen vitrimers (BNVs), to endow them with dynamic features at usage temperatures. Compared with boron-ester vitrimers (BEVs) without B-N dative bonds, the BNVs with B-N dative bonds showcase enhanced mechanical performance. The excellent mechanical properties come from the synergistic effect of the dative B-N supramolecular polymer and covalent boron‒ester networks. Moreover, benefiting from the associative exchange of B-O dynamic covalent bonds above their topological freezing temperature (Tv), the resultant BNVs also possess the processability. This study leveraged the structural characteristics of a boron-based vitrimer to achieve material reinforcement and toughness enhancement, simultaneously providing novel design concepts for the construction of new vitrimeric materials.

Highly Thermally Conductive Flexible Biomimetic APTES-BNNS/BC Nanocomposite Paper by Sol-Gel-Film Technology.

Owing to the evolution of 5G technology, new energy vehicles, flexible electronics, miniaturization and integration of microelectronic devices, high-frequency and high-power devices, and thermal management of materials must consider additional limitations such as electrical insulation, excellent transverse heat transfer, flexibility, and weight. Boron nitride nanosheets (BNNSs) are ideal insulating materials with high thermal conductivity. However, the problem of the 3D thermal conductivity pathway and toughness strength of nanocomposite paper loaded with inorganic thermal conductivity fillers remains a huge challenge. In this study, we propose a new method for preparing ultrathin, large, and uniformly thick BNNS for quantitative production. Bulk hexagonal boron nitride (hBN) layers were exfoliated using a simple and low-cost hydrothermal reaction, and large-scale fewer-layered BNNSs were efficiently prepared by ball milling with a high yield (up to 80%). Based on the aforementioned step, a flexible insulating composite film with high thermal conductivity and a natural "brick-mud" shell structure was constructed via the sol-gel-film conversion method. After prestretching and hot-pressing treatment, the hydrogels became denser, and the modified BNNS formed a three-dimensional (3D) network structure with an ordered orientation and interconnections in the bacterial cellulose (BC) matrix. After 100 folding cycles, the tensile strength of the nanofiber composite film reached 53 MPa, and the strength retention rate exceeded 42%. By optimizing the modified BNNS content, the thermal conductivity reached 24 W/(m·K). This simple approach has wide application potential in the next-generation electronic devices, providing options for designing thermal interface materials with excellent electrical insulation, high thermal stability, and flexibility.